A one package general purpose high gloss aluminium paint pigmented with leafing aluminium powder and dispersed in special resin and selected drying oils to produce a uniform chrome-like appearance.

Surfaces must be clean, dry and free of oil, grease, rust and foreign matter. Prime steel with anti-rust primer. Galvanized iron should be cleaned of all dirt, grease or other foreign matter by etching or solvent cleaning.

Stir well before use.
Brush, roller or conventional spray - full body.
After Primer coating apply two coats or hi gloss aluminium directly to properly prepared surfaces.

Designed for exterior/interior use in mild industrial atmosphere over recommended primers or previously painted surfaces of galvanized iron, steel, masonry and insulation. Suitable for storage tanks, refineries, radiators, bridges, fences and other surfaces at temperatures below 200 degrees centigrade.

Do not shake with mechanical shaker or overly agitate as the protective coating of the minute aluminium flakes may be removed resulting in a deleafed aluminium which appears dull, non-uniform, mottled coating. Keep spreading rate under control to achieve 64 microns wet film, for 61m² per US Gallon.

Characteristics 

• Colours: Bright
• Drying Time: Dry to touch in 1 to 4 hours and can be re-coated after allowing to stand overnight at 25 Celsius and 50% relative humidity. 
• Finish: Aluminium
• Solids by volume: 41 +/- 1%
• Specific Gravity: 0.94
• Recommended dry film thickness: 50 Microns
• Spreading rate per recommended DFT: 8.20 m2 per liter or 31.00 m2 per US gallon - 2 coats
• Flsh point: 30 Celsius