Select Colour

Download Our Catalogue
 
   
 
     
 
Products
Emulsions
Enamel Paints
Exterior Texture Coating
Waterproofing & Floor Paints
 Decaflex Impermeable Membrane
 Silicone Water Repellent
 Quito Epoxy Coating
 Epoxy Primer Paint (Steel)
 Thermoplastic Coating
 Sport Yard Acrylic Coat- Quito
 Traffic Marking Paint
 Fluorescent Paint
 Concrete Acrylic Coating
Putties
Decorative Paints
Sealants
Others

Colour Your Home

 

 

 

 

Thermoplastic Coating

Description

A self-crosslinking acrylamide type thermosetting acrylic resin based enamel.
Plasticoat system once applied create a monolithic membrane and thus seal, protect and insulate the surface.
It is a xylene soluble single component mortar based, silica powder aggregates with the thermoplastic acrylic resin, that provides an excellent flexible compound, abrasion resistant surface.

Surface

Surface should be free of grease, oil and dirt.
Apply recommended film thickness after surface is cleaned.

Application

Designed for use over a variety of domestic appliances made from galvanized iron steel etc…
Road and floor markings, swimming pool paints, garages.
Protective coating for concrete.
Waterproof membrane applied under tiles.
Tools : spray, brush or trowel.

Principal Properties

Fast physical drying 30 to 40 minutes
Very good adhesion on asphalt, concrete and stones.
Very good abrasion resistance.
Very good alkali and humidity resistance.
Very good exterior and interior durability.
Excellent stain resistance.
Carbon oxyde resistant.

Characteristics
Colour white, transparent or any other colour required.
Spreading rate 45 m2 / us gallon at 25 microns dry film thickness.
Solid by weight 57 % ± 1
Recommended dry film thickness 50 microns
Reduction up to 40 % by volume xylol
Flash point 45 degree centigrade