Select Colour

Download Our Catalogue
 
   
 
     
 
Products
Emulsions
Enamel Paints
Exterior Texture Coating
Waterproofing & Floor Paints
 Decaflex Impermeable Membrane
 Silicone Water Repellent
 Quito Epoxy Coating
 Epoxy Primer Paint (Steel)
 Thermoplastic Coating
 Sport Yard Acrylic Coat- Quito
 Traffic Marking Paint
 Fluorescent Paint
 Concrete Acrylic Coating
Putties
Decorative Paints
Sealants
Others

Colour Your Home

 

 

 

 

Quito Epoxy Coating

Description

Quito epoxy is a two-component epoxy polyamide coating with excellent chemical resistance

Perfomance

As a protective coating on steel structures, concrete, masonery and wood surfaces,Pipelines of steel and concrete tanks of fuel or lubrication oil.
 It has excellent resistance to salt water and other marine locations. It has good heat resistance and is not toxic.     
 

Surface

Remove oil and grease etc. with suitable detergent. Surfaces must be clean, free from salt dirt and other contaminants.
For steel : abrasive blasting to SA 2 ½ is advisable. For temporary protection a suitable primer may be used.
For concrete : high pressure hosing with fresh water is recommended to remove slip agent and other possible contaminants. When paint removers or etching solutions are used, water flushing should be properly applied especially in concrete surfaces to remove glaze or laitance and blow holes should be grouted.

Epoxy resins in solution can be applied by brush, roller or spray gun.
 

Dust-dry time

1 – 8 hours

Hard aspect

1 – 2 days

Potlife around 20 C

3 hours

Recoat interval

Between 7 and 14 hours

Clean up

with epoxy reducer

Characteristics
Colour clear or pigmented (wide range)
Finish semi gloss
Solids by volume 60 % +/- 2 %
Mixing ratio 1 part hardener component , 3 parts Quito Epoxy resins
Spreading rate 9 sq.mt/litre – 100 microns per coat
Specific gravity 1,45 kg/litre
Flash point 29 centigrade