Quito epoxy is a two-component epoxy polyamide coating with excellent chemical resistance

As a protective coating on steel structures, concrete, masonery and wood surfaces,Pipelines of steel and concrete tanks of fuel or lubrication oil.
 It has excellent resistance to salt water and other marine locations. It has good heat resistance and is not toxic.     
 

Remove oil and grease etc. with suitable detergent. Surfaces must be clean, free from salt dirt and other contaminants.
For steel : abrasive blasting to SA 2 ½ is advisable. For temporary protection a suitable primer may be used.
For concrete : high pressure hosing with fresh water is recommended to remove slip agent and other possible contaminants. When paint removers or etching solutions are used, water flushing should be properly applied especially in concrete surfaces to remove glaze or laitance and blow holes should be grouted.

Epoxy resins in solution can be applied by brush, roller or spray gun.
 

1 – 8 hours

1 – 2 days

3 hours

Between 7 and 14 hours

with epoxy reducer